**NEW** WEEKLY MODELING SESSION: Week 005 Thunderbird 2 - Page 3

parel · 04-13-2009, 05:32 AM

Update- Rough WIP of a camo version from the US military.

mseydel · 04-13-2009, 09:51 PM

I know this challenge is essentially over, but I wanted to continue with the texturing. I had seen some really great renders recently from Dasch with Strata, so I decided to dust off my copy. Strata does have a nice render engine; this is all with a diffuse layer; bump map is still to come with further painting. I couldn't resist a little painted fire with some motion blur...

Kyro · 04-13-2009, 10:30 PM

great job Matt. texture came out realy well (i have to do mine over

)
flames look good too

dasch · 04-13-2009, 10:54 PM

Quote:

Originally Posted by mseydel

I know this challenge is essentially over, but I wanted to continue with the texturing. I had seen some really great renders recently from Dasch with Strata, so I decided to dust off my copy. Strata does have a nice render engine; this is all with a diffuse layer; bump map is still to come with further painting. I couldn't resist a little painted fire with some motion blur...

Looks Good Matt. Has a Retro Pulp Comic book look to it.

parel · 04-14-2009, 05:56 AM

Ditched the camo- cleaned the mesh a little and then tried in 3dcoat again.

http://1.bp.blogspot.com/_9QnBOsHWcL...9+14003+AM.jpg
http://2.bp.blogspot.com/_9QnBOsHWcL...9+14114+AM.jpg
http://3.bp.blogspot.com/_9QnBOsHWcL...9+14709+AM.jpg

Kyro · 04-14-2009, 07:24 AM

nice work Parel

parel · 04-15-2009, 04:45 PM

Here is where it stands until I figure out how to get the model out of 3dcoat and into Maxwell.
Screen grab from 3dcoat composited in PS.

David · 04-15-2009, 05:08 PM

Well done mseydel on your great rendition of the Thunderbirds ship. You've been selected as the T-shirt winner this week. Several other strong models from parel, Kyro, modelwright and Kaylon. Keep up the good work!

Kyro · 04-15-2009, 05:11 PM

grats matt!

parel · 04-15-2009, 05:31 PM

Wow- there were prizes involved? cool

Congrats Matt

mseydel · 04-15-2009, 07:56 PM

thanks, folks! I owe Kyro a debt for texturing so well early in the week; that got my butt in gear to UV map and texture. I'm psyched about the shirt- I'll wear it proudly at the next Autodesk NYC Users group meet-up!

parel · 04-16-2009, 05:55 PM

Wahaay- My friend Eric Lagman showed me how to bring the model into Maxwell and render.

Kyro · 04-16-2009, 06:10 PM

wooot nice job Parel, looking good for your future models

parel · 04-16-2009, 07:21 PM

Thanks Kyro- I was pretty stoked just to get the textures into Maxwell.

parel · 04-17-2009, 04:24 AM

did some more composites

04-13-2009, 05:32 AM	#41
parel Member Join Date: Jul 2007 Posts: 60	Update- Rough WIP of a camo version from the US military. Last edited by parel; 04-13-2009 at 05:36 AM.

04-13-2009, 09:51 PM	#42
mseydel Matt_Connors on Twitter Join Date: Apr 2005 Location: New York, NY Posts: 253	I know this challenge is essentially over, but I wanted to continue with the texturing. I had seen some really great renders recently from Dasch with Strata, so I decided to dust off my copy. Strata does have a nice render engine; this is all with a diffuse layer; bump map is still to come with further painting. I couldn't resist a little painted fire with some motion blur... Attached Thumbnails

04-15-2009, 04:45 PM	#47
parel Member Join Date: Jul 2007 Posts: 60	Here is where it stands until I figure out how to get the model out of 3dcoat and into Maxwell. Screen grab from 3dcoat composited in PS. Attached Thumbnails

04-15-2009, 05:08 PM	#48
David Nevercenter Marketing Join Date: Oct 2008 Posts: 158	Selection: mseydel Well done mseydel on your great rendition of the Thunderbirds ship. You've been selected as the T-shirt winner this week. Several other strong models from parel, Kyro, modelwright and Kaylon. Keep up the good work!

04-16-2009, 05:55 PM	#52
parel Member Join Date: Jul 2007 Posts: 60	Wahaay- My friend Eric Lagman showed me how to bring the model into Maxwell and render. Attached Thumbnails

04-13-2009, 10:30 PM	#43
Kyro Senior Member Join Date: Mar 2009 Location: Belgium Posts: 128	great job Matt. texture came out realy well (i have to do mine over ) flames look good too

04-14-2009, 05:56 AM	#45
parel Member Join Date: Jul 2007 Posts: 60	Ditched the camo- cleaned the mesh a little and then tried in 3dcoat again. http://1.bp.blogspot.com/_9QnBOsHWcL...9+14003+AM.jpg http://2.bp.blogspot.com/_9QnBOsHWcL...9+14114+AM.jpg http://3.bp.blogspot.com/_9QnBOsHWcL...9+14709+AM.jpg

04-14-2009, 07:24 AM	#46
Kyro Senior Member Join Date: Mar 2009 Location: Belgium Posts: 128	nice work Parel

04-15-2009, 05:11 PM	#49
Kyro Senior Member Join Date: Mar 2009 Location: Belgium Posts: 128	grats matt!

04-15-2009, 05:31 PM	#50
parel Member Join Date: Jul 2007 Posts: 60	Wow- there were prizes involved? cool Congrats Matt

04-15-2009, 07:56 PM	#51
mseydel Matt_Connors on Twitter Join Date: Apr 2005 Location: New York, NY Posts: 253	thanks, folks! I owe Kyro a debt for texturing so well early in the week; that got my butt in gear to UV map and texture. I'm psyched about the shirt- I'll wear it proudly at the next Autodesk NYC Users group meet-up!

04-16-2009, 06:10 PM	#53
Kyro Senior Member Join Date: Mar 2009 Location: Belgium Posts: 128	wooot nice job Parel, looking good for your future models

04-16-2009, 07:21 PM	#54
parel Member Join Date: Jul 2007 Posts: 60	Thanks Kyro- I was pretty stoked just to get the textures into Maxwell.

04-17-2009, 04:24 AM	#55
parel Member Join Date: Jul 2007 Posts: 60	did some more composites Attached Thumbnails